1300 428 866
sales@autoopeners.com.au
Auto Openers

Your cart is empty

Door Pro Roller Door Opener

Door Pro Roller Door Opener

Technical Overview

The Auto Openers Door Pro is designed for single and double residential roller doors up to 16.5m². With a 700N motor, compact build, and compatibility across all major Australian brands, it delivers reliable automation for most standard installations.

Included in the Box

  • Auto Openers “Door Pro” Roller Door Opener
  • 3x AOTXv2 Keyring Transmitters
  • Pair of Extension Tines
  • Video Installation Instructions
  • 5 Year Warranty
Brochure Installation Manual DIY Video Guide Buy Online

Specifications & Features

Motor Peak Power
700N DC motor provides reliable lifting for doors up to 16.5m².
Lighting
12 UltraBright LEDs provide improved illumination in the garage.
Warranty
5 Year Warranty (DIY installations included).
Improved Transmitter Range
Enhanced signal range allows activation from further away.
Memory Register
Stores up to 20 remote transmitters.
Manual Release Cord
Allows manual operation of the garage door in case of power outages.
Quiet Operation
DC motor minimises vibration and noise, providing smooth, low-impact operation.
Soft-Start / Soft-Stop
Reduces stress on the opener and door by gradually increasing and decreasing speed.
Automatic Force Sensing
Constantly adjusts the lifting force required for smooth, efficient operation.
Timer-to-Close
Automatically closes the door after a set period of time (when safety beams are installed).
Premium Safety Reverse
Stops and reverses automatically if the door is obstructed during operation.
Minimum Side Room
Requires only 45mm of side clearance for installation.

Frequently Asked Questions

How do I activate/deactivate my remote?

To program a remote into your opener:
- Press and hold the “CODE” button until the Coding LED illuminates, then release.
- Press and hold a button on your remote control for 2 seconds, then release. The Coding LED will extinguish.
- Press and hold the same button again. The Coding LED will flash and the opener will beep to confirm the remote has been programmed.
- Test the operation of your remote.

To delete all remotes from your opener:
- Press and hold the “CODE” button. The Coding LED will flash 8 times, then “C” will appear on the display and the opener will beep.
- Test to ensure your removed remote no longer operates the opener.

Where do I get a replacement/additional remotes?

We pair with a number of leading online retailers, who can ship your remote if purchased online. View our list of resellers here.

Otherwise, please call us on 1300 42 88 66 to find your local Auto Openers Accredited Dealer.

How do I open my roller door opener manually?

Pull the handle on the bottom of your opener to disengage the motor. This will allow you to manually lift the roller door.

I cannot program my remote.

Please ensure that the door limits have been set in the opener. You can view our installation video here which shows how to reset the limits: Watch installation video.

How do I turn PE Beams on or off?

To enable PE Beams, set the opener to Setting “11”, press “UP” for “H”, then press “SET” to confirm.
To disable PE Beams, return to “11” and press “SET”.

How do I enable or disable Auto Close?

To turn on Auto Close, go to Setting “- -” and adjust the timing. Maximum time is 9 (PE Beams must be fitted). To turn Auto Close off, set the timing to “0”.

How do I adjust the Force Settings?

Press and hold “SET” until the LED displays “3”, then release.
Use “UP” and “DOWN” to adjust the Force setting (1 is lowest, 9 is highest).
Press “SET” to save.